OREC Snow Bull Manuel D'utilisation page 11

Plow
CAUTION
Do not change the angle of plow while the machine is moving forward/backward and while
the plow is on the snow. It might be difficult to adjust the angle of plow because of snow
resistance, or impossible to secure the plow at the height you want. It may cause mechanical
failures.
The plow enables the operator to push and clear the
snow.
Depending on the situation, adjust the angle and height
of plow.
<How to adjust height of plow>
・ To adjust the height of plow, grasp the lever lightly
with your right hand and lower the handle. To set the
height of plow, release the lever. You can set the
plow at any height.
・ Holding the plow height adjustment lever locks the
lever, so you can keep working with the height of the
plow free. To unlock the lever, grasp the release
lever at the bottom of the lever.
・ Depending on the situation, you can chose "fixed
height" or "free height" of plow.
＜ How to adjust angle of plow＞
・ To adjust the angle of plow at the 15° or 30° position,
hold the angle adjust lever and move it up/down.
When you want to secure the plow angle, release the
plow angle adjustment lever to the position you want
to secure.
-10-