Selecting/Changing Personal Settings - Melitta Caffeo BARISTA TS Mode D'emploi

Personal settings – "My Coffee"
5. Use the arrow buttons to select Enabled or Disabled and confirm with
"menu/ok".
6. Repeatedly select the Exit command to exit the menu.
» The ready symbol appears on the display.
7.2

Selecting/changing personal settings

Depending on beverage, you can assign the following settings to a user:
ū Coffee amount: in millilitres,
ū Froth amount: in millilitres,
ū Milk amount: in millilitres,
ū Hot water amount: in millilitres,
ū Beans: bean chamber 1 or 2,
ū Coffee strength: very mild, mild, normal, strong, very strong,
ū Temperature: low, normal, high.
The assignment of personal settings to a user is always similar. Setting the
coffee amount for a cappuccino is described here as an example.
My coffee
--1--
Cappuccino
Exit
Recipes
Coffee amount
Froth amount
Beans
Coffee strength
Temperature
Fig. 19: Changing personal settings
Requirement: The ready symbol appears on the display.
1. Press the "menu/ok" button for 2 seconds.
» The menu appears on the display.
2. Navigate to the My Coffee menu.
3. Use the arrow buttons to select a user and confirm with "menu/ok".
4. Navigate to the Cappuccino > Coffee amount menu.
5. Use the arrow buttons to select an amount and confirm with "menu/ok"
6. Repeatedly select the Exit command to exit the menu.
» The ready symbol appears on the display.
» The next time a cappuccino is prepared by the user, the selected coffee
amount is used.
78