Activating/Deactivating Auto Bean Select; Setting Auto Off - Melitta Caffeo BARISTA TS Mode D'emploi

8.3

Activating/deactivating Auto Bean Select

You can activate/deactivate automatic selection of a bean type.
Requirement: The ready symbol appears on the display.
1. Press the "menu/ok" button for 2 seconds.
» The menu appears on the display.
2. Navigate to the System > Auto Bean Select menu.
3. Use the arrow buttons to select Enabled or Disabled and confirm with
"menu/ok".
4. Repeatedly select the Exit command to exit the menu.
» The ready symbol appears on the display.
8.4

Setting Auto OFF

If you do not operate the appliance for a long time, it switches off automat-
ically after a specified time. Set the duration until the appliance switches off
in the Auto OFF menu. You can also define a specific point in time.
Information
If the duration and point in time are activated simultaneously, the appliance
switches off after the event which occurs first.
Setting the duration for Auto OFF
Requirement: The ready symbol appears on the display.
1. Press the "menu/ok" button for 2 seconds.
» The menu appears on the display.
2. Navigate to the Auto OFF > OFF after.. menu.
3. Use the arrow buttons to select a time and confirm with "menu/ok".
4. Repeatedly select the Exit command to exit the menu.
» The ready symbol appears on the display.
Information
Auto OFF cannot be deactivated completely. After 8 hours without being
operated, at the latest, the appliance switches off.
Changing basic settings
81