Positioning The Appliance; Connecting The Appliance; Switching The Appliance On For The First Time - Melitta Caffeo BARISTA TS Mode D'emploi

First steps
3.3

Positioning the appliance

Observe the following instructions:
ū Do not position the appliance in damp rooms.
ū Position the appliance on a stable, flat and dry surface.
ū Do not position the appliance in the vicinity of sinks or the like.
ū Do not position the appliance on hot surfaces.
ū Position the appliance a sufficient distance, approx. 10 cm, away from
the wall and other objects. The space above the appliance should be at
least 20 cm.
ū Route the power cable so that it cannot be damaged by edges or hot
surfaces.
3.4

Connecting the appliance

Observe the following instructions:
ū Check that the supply voltage matches the operating voltage specified
in the technical data (see table Technical data on page 95).
ū Only connect the appliance to a properly installed earthing contact
socket. If in doubt, consult a specialist electrician.
ū The socket must be fused with at least a 10 A fuse.
3.5

Switching the appliance on for the first time

During initial starting up, you can set the language, the time and the water
hardness. The settings can be changed at a later point in time (see chap-
ter 8 Changing basic settings on page 80 and chapter 9.8 Setting the
water hardness on page 91).
Use the enclosed test strip to determine the water hardness. Observe the
instructions on the test strip packaging and in table Water hardness range
on page 95.
Information
We recommend pouring away the first two cups of coffee after initially
starting up.
60