Filling In Water - Melitta Caffeo BARISTA TS Mode D'emploi

4.6

Filling in water

Use only fresh, cold water without carbon dioxide for optimum coffee
enjoyment. Change the water daily.
Information
The quality of the water extensively determines the taste of the coffee.
Therefore, use a water filter (see chapter 9.8 Setting the water hardness on
page 91 and chapter 9.9 Using a water filter on page 91).
1
Fig. 10: Water tank
1. Open the lid of the water tank and pull the water tank (1) upwards out of
the appliance using the handle.
2. Fill the water tank with water.
Note the maximum capacity of 1.8 litres.
3. Insert the water tank into the appliance from above and close the lid.
Basic operation
67