Changing Beverage Settings Before And During Preparation; Changing Beverage Settings Before Preparation - Melitta VARIANZA CSP Mode D'emploi

6. You can execute the Easy Cleaning programme or prepare further bev-
erages.
a) Execute the Easy Cleaning programme. To do so, follow the instruc-
tions on the display. Information on this is available in section 9.4
Using the "Easy Cleaning" programme on page 87.
b) Prepare further beverages and execute the Easy Cleaning programme
later.
» The ready symbol appears on the display.
6.7 Changing beverage settings before and during
preparation
Beverage settings can be changed before and during beverage preparation.
Information
The following settings only apply to the current beverage preparation.

Changing beverage settings before preparation

The total beverage amount and the co ee strength can be changed before
selecting a beverage.
Before selecting a beverage, use the arrow buttons to set a beverage
ƒ
amount.
Before selecting a beverage, use the "Co ee strength" button to set the
ƒ
co ee strength.
Information
When preparing mixed beverages, the total beverage amount is sub-
divided according to a speci ed ratio. This applies to mixed beverages
made from co ee with milk or hot water.
If a beverage is not prepared within 1 minute, the appliance switches to
the default settings.
Preparing beverages
77