Basic Operation; Switching The Appliance On And Off - Melitta Caffeo BARISTA TS Mode D'emploi

Requirement: The appliance has been positioned and connected.
1. Place a vessel beneath the outlet.
2. Switch the appliance on with the ON/OFF button.
» The welcome display appears on the display.
» The request to carry out set-up appears on the display: Please set up
the machine.
» The "menu/ok" button flashes.
3. Confirm with "menu/ok".
» The Language menu appears.
4. Select your language with the arrow buttons. Confirm with
"menu/ok".
» The Clock menu appears.
5. Select the hour and minutes with the arrow buttons. Confirm each set-
ting with "menu/ok".
» The Water hardness menu appears.
6. Select the determined water hardness range with the arrow buttons or
confirm the default value with "menu/ok".
» The request Please refill and insert water tank appears.
7. Remove the water tank. Rinse the water tank out with clean water. Fill
the water tank with fresh water and insert it.
» The appliance heats up and performs automatic rinsing.
» The ready symbol and the request Fill beans appear in the display
8. Fill coffee beans into the bean container. To do this, read chapter Filling
with coffee beans and using Bean Select on page 65.
4

Basic operation

This chapter describes basic operating steps for using the appliance on a
daily basis.
4.1

Switching the appliance on and off

Before switching on when initially starting up the appliance, read chap-
ter 3.5 Switching the appliance on for the first time on page 60.
Information
ū The appliance performs automatic rinsing when switching on and off.
ū During rinsing, rinsing water is also conducted into the drip tray.
Basic operation
61