Meister HP1500M Traduction Du Manuel D'utilisation Original page 29

3 Personal safety
a Stay alert, watch what you are
doing and use common sense when
operating a power tool. Do not use
a power tool while you are tired or
under the influence of drugs, alco­
hol or medication. A moment of inat­
tention while operating power tools
may result in serious personal injury.
b Use personal protective equipment.
Always wear eye protection.
Protective equipment such as dust
masks, non­skid safety shoes, hard
hat, or hearing protection used for
appropriate conditions will reduce
personal injuries.
c Prevent unintentional starting.
Ensure the switch is in the off­posi­
tion before connecting to power
source and/or battery pack, picking
up or carrying the tool. Carrying
power tools with your finger on the
switch or energising power tools that
have the switch on invites accidents.
d Remove any adjusting key or
wrench before turning the power
tool on. A wrench or a key left
attached to a rotating part of the
power tool may result in personal
injury.
e Do not overreach. Keep proper
footing and balance at all times.
This enables better control of the
power tool in unexpected situations.
f Dress properly. Do not wear loose
clothing or jewellery. Keep your
hair, clothing and gloves away from
moving parts. Loose clothes, jewel­
lery or long hair can be caught in
moving parts.
5410520-Heissluftgeblaese_man.indd 29 5410520-Heissluftgeblaese_man.indd 29
g If devices are provided for the con­
nection of dust extraction and col­
lection facilities, ensure these are
connected and properly used. Use
of these devices can reduce dust
related hazards.
4 Power tool use and care
a Do not force the power tool. Use
the correct power tool for your
application. The correct power tool
will do the job better and safer at the
rate for which it was designed.
b Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be con­
trolled with the switch is dangerous
and must be repaired.
c Disconnect the plug from the power
source before making any adjust­
ments, changing accessories, or stor­
ing power tools. Such preventive safety
measures reduce the risk of starting the
power tool accidentally.
d Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the power tool. Power tools are dan­
gerous in the hands of untrained users.
e Maintain power tools. Check for mis­
alignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool's operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
f Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
29
17.07.20 07:00 17.07.20 07:00