Agilent Technologies Turbo-V 3K-G Notice De Mode D'emploi page 340

17 Technical Information
Profibus Message Mapping
Offset Size Unit
Byte Byte Res
1 2 Hz
3 2 Hz
Tab. 14 Input buffer (15 words)
Offset Size Unit
Byte Byte Res
0 2 mA
2 2 W
4 2 W
6 2 Hz
8 2 Hz
10 2 -
12 2 -
14 2 -
16 2 min
18 2 hours
20 1 V
21 1 °C
22 1 °C
340/360
Range Description
500 - High Speed Value
530 Set the high rotational speed, default = 530
500 - Low Speed Value
530 Set the low rotational speed, default = 500
Range Description
0-10000 Current. Motor current consumption
0-750 Power. Motor power adsorption
0-750 Power Limit Applied. Maximum allowable power
0-530 Driving Frequency. Read the rotational speed of the pump
0-530 Target Frequency. Read the target rotational speed
- Flow Meter Alarm Time
Specific option, not available on standard models
- Flow Meter Alarm Event
Specific option, not available on standard models
0-65536 Cycle Number. Number of cycles (start and stop) done by the
pump
0-65536 Last Cycle Time. How long the last cycle lasted
0-65536 Pump Life. Total pump running time
0-100 Voltage
Voltage provided to the motor
0-70 Pump Bearing Temperature
Read the pump upper bearing temperature.
If > 60 °C the controller goes in fail and the pump is stopped
0-45 Pump Body Temperature
Read the pump body temperature close to the water circuit.
If > 42 °C the controller goes in fail and the pump is stopped
Turbo-V 3K-G Pumping System User Manual / 87-901-011-01 (D)
Win
Serial
120
117
Win
Serial
200
201
155
203
120
213
215
301
300
302
201
204
216