Publicité
Maintenance
The Turbo-V 3K-G does not require any maintenance. Any work
performed on the system must be carried out by authorized
personnel.
WARNING!
Before carrying out any work on the system, disconnect it from the mains,
vent the pump by opening the appropriate valve, wait until the rotor has
stopped turning and wait until the surface temperature of the pump falls
below 50 °C.
In the case of breakdown, contact your local Agilent service center
who can supply a reconditioned system to replace that broken down.
Before returning the system to the constructor for repairs, or replacement with a
NOTE
reconditioned unit, the "Request for Return" sheet attached to this instruction
manual must be filled-in and sent to the local sales office. A copy of the sheet
must be in-serted in the system package before shipping.
If a system is to be scrapped, it must be disposed of in accordance
with the specific national standards.
Turbo-V 3K-G Pumping System User Manual / 87-901-011-01 (D)
Instructions for Use
Maintenance
297/360
16
Publicité
Chapitres
