Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1.
Press the menu button
2.
Select the HANDSET menu with
3.
Select the BEEP function with
4.
Select one of the functions KEYTONE, LOW BATTERY or OUT RANGE
with
and
5.
Switch the selected warning tone on or off with
.
6.
Now select further menu functions or exit the menu by pressing and
holding the
8.9
Changing the PIN code
Some functions of the telephone system are protected against unauthorised use
by a PIN code. The PIN code consists of four numbers. As supplied, the PIN
code is set to "0000". To change the PIN code, proceed as follows:
1.
Press the menu button
2.
Select the SETUP menu with
3.
Select the PIN CODE function with
4.
Now enter the current four-digit PIN code using the number pad (factory
setting 0 0 0 0) and confirm with
5.
Now enter the new four-digit PIN code using the number pad and
confirm with
6.
Now enter the new four-digit PIN code once more for confirmation and
confirm with
7.
Now select further menu functions or exit the menu by pressing and
holding the
If the old PIN code is not entered correctly, the process will be aborted.
- Special functions -
.
and confirm with
button.
.
.
.
button.
and
and confirm with
and
and confirm with
.
and
and confirm with
and
and confirm with
.
.
.
and
and confirm with
.
.
153
Publicité
Chapitres
Table des Matières
