Restoring Factory Settings - switel D6020 Mode D'emploi

8.12

Restoring factory settings

The handset and the base station are reset to the factory settings using this
function. The phone book, the caller list (CLID) and all phone numbers in the
redial facility will be deleted.
Factory settings:
Language: German
Battery warning tone: On
Range warning: On
Button click: On
Receiver volume: 3
Pin code: 0 0 0 0
Pause: 3 sec.
Dialling method: MV/Tone
1. Press the menu button
2. Select the SETUP menu with
3. Select the DEFAULT function with
4. Enter the PIN code using the number pad (factory setting 0000) and
confirm with
5. Confirm with the menu button
6. After a short time, the factory settings will be restored. The display will
indicate the ready mode once more.
Note: If you have forgotten the PIN code, you can also restore the factory
settings without it.
1. Remove a battery from the handset.
2. Hold the
pressed until the message DEFAULT appears in the display.
3. Confirm with
the process by pressing the
- Special functions -
.
. The message CONFIRM? will appear in the display.
button pressed and replace the battery. Hold the
and the factory settings will be restored. You can abort
Handset name: D6020
Automatic call accept: On
External ring tone: 3
Internal ring tone: 1
Handset ring tone volume: 3
Base ring tone: 2
Base ring tone volume: 3
FLASH time: 100ms
and and confirm with
and and confirm with
.
button.
.
.
button
155