The Caller List - switel D6020 Mode D'emploi

6.1

The caller list

To view the phone numbers on the caller list, please proceed as follows:
1. Press the
the display. If the caller list is empty, the display will show the message
EMPTY.
2. Further numbers in the caller list can now be selected by means of the
and buttons. If there are no more phone numbers available, you will hear
a signal tone. Two symbols in the display will tell you whether the entry in
the caller list has already been viewed and whether the caller has already
been called back.
=> The caller has not yet been called back.
=> The caller has already been called back.
Notes: Information can be called up using the
- If the phone number is longer than 12 digits, the remaining numbers will be
displayed.
- Displays the number when the name of the caller is already stored in the
phone book.
- Displays the date and time when this information is transmitted by the caller.
- If no further data are available, the display will show the message ADD?.
- You can return to the list once more by pressing the
3. If you want to call back a number on the caller list directly, simply press the
call button
4. Exit the caller list by holding the
144
- Caller display CLID -
button and the last phone number received will be shown in
and the number will be dialled immediately.
button.
button pressed.
button.