Fan Speed Setting; Weekly Timer Operation - mundoclima MUCR-H11 Série Manuel D'installation Et L'utilisauter

Operation mode setting
5
Confirm
- +
6 Room temperature setting
Confirm
- +

Fan speed setting

7
Press + and − to set the fan speed then press
Confirm
CONFIRM.
- +
NOTE: This setting is unavailable in the AUTO,
DRY or OFF modes.
Different scheduled events can be set by repeating
8
steps 3 through 7.
9 Additional days, in a one week period, can be set
by repeating steps 3 through 8.
NOTE: The weekly timer setting can be returned to the
previous step by pressing BACK. The current setting is
restored. The controller will not save the weekly timer
settings if there is no operation within 30 seconds.

WEEKLY timer operation

To start
Press Timer to select the
Timer
starts automatically.
To cancel
Press Power to cancel the timer mode.
The timer mode can also be canceled by changing the
Timer
timer mode using Timer.
To set the DAY OFF (for a holiday)
1
After setting the weekly timer, press CONFIRM.
Confirm
2
Press + or − to select the day of the week.
- +
Press + and − to set the operation mode
then press CONFIRM.
Press + and − to set the room temperature
then press CONFIRM.
NOTE: This setting is unavailable in the FAN
or OFF modes.
, and then the timer
ex.
102