Timer Setting - mundoclima MUPO-09-H10 Manuel D'installation

In heat mode (Optional

After 1 hour the preset temperature is decreased by 1°C, after another
hour the preset temperature will again be decreased by 1°C.
Then the temperature is kept constant for 10 hours. And all the indicators
dim to dark. The fan speed may switch over to low speed for silent
operating and cannot be selected.

5.4.8. TIMER SETTING

The timer has two ways of operation:
To turn off
(When power on)
To turn on
(When power off)
Cancel timer
(1hour-24hours):
Press Timer key to
turn on the timer
function.
Press Timer key to
turn on the timer
function.
Press UP/DOWN repeatedly until the LED shows '00'.
Note: when press POWER will also exit the timer
setting.
for Heating Function Unit
61
only):
Press UP/DOWN
repeatedly to set the
delay OFF time.
Press UP/DOWN
repeatedly to set the
delay ON time.