Device Information - Fronius Galvo 208-240 Instructions De Service

Device Informa- The device is used to display settings relevant to a power supply company. The displayed
tion values depend on the respective country setup or device-specific inverter settings.
Display range
General:
Country Setup:
MPP Tracker:
AC Monitoring:
AC Voltage Limits:
AC Frequency Limits:
Q-Mode:
AC Power limits:
34
General / Country Setup / MPP Tracker / AC Monitoring / AC
Voltage Limits / AC Frequency limits / Q-Mode / AC Power Lim-
its / AC Voltage Derating / Fault Ride Through
Device type
Fam.
Setup
Country setup
Version
Country setup version
Group
Inverter software update group
Tracker 1
GMTi
Startup time of the inverter in s
GMTr
Restart time in s after a grid error
ULL
Grid voltage average value over 10 minutes in V
LLTrip
Detection time for long-term voltage monitoring
UILmax
Upper inner grid voltage value in V
UILmin
Lower inner grid voltage value in V
FILmaw
Upper inner grid frequency value in Hz
FILmin
Lower inner grid frequency value in Hz
Current power factor cos phi
(e.g., constant cos(phi) / constant Q / Q(U) characteristic / etc.)
Max. P AC
manual power reduction