Fronius Galvo 208-240 Instructions De Service page 24

Exiting a menu item
If no key is pressed for 2 minutes
-
-
-
General Setup
1
Menu Item Set-
2
tings
3
The first digit of a value to be set flash-
es:
The second digit of the value flashes.
the entire value flashes.
The currently selected item is displayed.
24
G R A P H
the inverter switches to the "NOW" menu item from anywhere within the menu level
(exception: Setup menu item "Standby")
the display illumination turns off
the current power of feeding in is displayed.
Accessing the SETUP menu item
Use the "Up" and "Down" keys to select the desired menu item
Press the "Enter" key
Use the "Up" and "Down" keys to se-
4
lect a value for the first digit
Press the "Enter" key
5
Repeat steps 4 and 5 until...
6
Press the "Enter" key
7
Repeat steps 4–6 for units or other
8
values to be set until the unit or value
to be set flashes.
Press the "Enter" key to save and ap-
9
ply the changes.
Press the "Esc" key to discard the
changes.
To exit a menu item, press the "Back"
4
key
The menu level is displayed
The available settings are displayed:
Use the "Up" and "Down" keys to se-
4
lect the desired setting.
Press the "Enter" key to save and ap-
5
ply the selection.
Press the "Esc" key to discard the se-
lection.
The currently selected item is displayed.