Time/Date - Fronius Symo Advanced Mode D'emploi

To activate the Energy Manager function, select "E-Manager" and press the
"Enter" key.
When the "Energy Manager" function is activated, the "Energy Manager" icon is
shown at the top left of the display:
To deactivate the "Energy Manager" function, select another function (ALL / Per-
manent / OFF / ON) and press the "Enter" key.
NOTE!
Information on setting the switch-on and switch-off point
Too small a difference between the switch-on point and switch-off point as well
as fluctuations in effective power can lead to multiple switching cycles.
To avoid frequent switching on and off, the difference between the switch-on
point and the switch-off point should be at least 100 - 200 W.
When selecting the switch-off point, consider the power consumption of the
connected load.
When selecting the switch-on point, consider the weather conditions and the ex-
pected solar radiation.
Application example
Switch-on point = 2,000 W, switch off point = 1,800 W
If the inverter supplies 2,000 W or more, the inverter's floating switch contact is
switched on.
If the inverter output falls below 1,800 W, the floating switch contact is switched
off.
This makes it possible to quickly implement interesting application options, such
as operating a heat pump or an air-conditioning system using as much self-pro-
duced power as possible

Time/Date

Setting the time, date, display format, and automatic adjustment for daylight
saving time
Setting range
Set time
Setting the time (hh:mm:ss or hh:mm am/pm, depending on the setting under
Time display format)
Set date
Setting the date (dd.mm.yyyy or mm/dd/yyyy, depending on the setting under
Date display format)
Time display format
For specifying the format in which the time is displayed
Setting range
38
when the floating NO switch contact is switched off (open contact)
when the floating NC switch contact is switched on (closed contact)
Set time / Set date / Time display format / Date display
format / Daylight saving time
12hrs/24hrs