Significance Of These Instructions; Proper Working Order Of The Device; Symbols On The Device; Electrical Equipment - Sartorius Entris II BCE Série Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 95
2 .3
Significance of these
Instructions
Failure to follow the instructions in this manual can have
serious consequences, e .g . exposure of individuals to
electrical, mechanical, or chemical hazards .
Before working with the device: Read the instructions
t
carefully and completely .
If these instructions are lost, request a replacement or
t
download the latest version from the Sartorius website
(www .sartorius .com) .
Ensure that the information contained in these
t
instructions is available to all individuals working on
the device .
2 .4
Proper Working Order of the
Device
A damaged device or worn parts may lead to
malfunctions or cause hazards which are difficult to
recognize .
Only operate the device when it is safe and in perfect
t
working order .
In the event of damage to the housing, disconnect the
t
device from the power supply and prevent it from
being restarted .
Do not open the device housing . Have any
t
malfunctions or damage repaired immediately by
Sartorius Service .
Comply with the maintenance intervals (for intervals
t
and maintenance work, see Chapter "9 . 1 Removing
the Weighing Pan and Associated Components",
page 34) .
2 .5

Symbols on the Device

All symbols appearing on the device, such as warnings
and safety labels, must be legible .
Do not conceal, remove, or modify the symbols .
t
Replace the symbols if they become illegible .
t
2 .6

Electrical Equipment

2 .6 . 1
Damage to the Electrical Equipment of
the Device
Damage to the device's electrical equipment, e .g .
damaged insulation, can be life-threatening . There is a
danger to life from contact with live parts .
If the electrical equipment of the device is defective,
t
cut off the power supply and contact Sartorius Service .
Keep live parts away from moisture . Moisture can
t
cause short circuits .
2 .6 .2

Working on the Device's Electrical

Equipment

Only Sartorius Service personnel may work on or modify
the electrical equipment of the device . The device may
only be opened by Sartorius Service personnel .
2 .6 .3
Power Supply Unit and Power Supply
Cable
Serious injury can result, e .g . from electric shocks, if an
unsuitable/inadequately dimensioned power cord or
unsuitable power supply unit is used .
Only use the original power supply unit and original
t
power supply cable .
If the power supply unit or power supply cable must be
t
replaced: Contact Sartorius Service . Do not repair or
modify the power supply unit or power cable .
2 .7

Conduct in an Emergency

If there is immediate danger of personal injury or
equipment damage, e .g ., due to malfunctions or
dangerous situations, the device must be immediately
taken out of operation .
Disconnect the device from the power supply .
t
Malfunctions should be remedied by Sartorius Service .
t
2 .8

Accessories and Spare Parts

The use of unsuitable accessories and spare parts can
affect the functionality and safety of the device and have
the following consequences:
− Risk of injury to persons
− Damage to the device
− Device malfunctions
− Device failure
Only use approved accessories and spare parts
t
supplied by Sartorius .
Only use accessories and spare parts that are in proper
t
working order .
2 .9

Personal Protective Equipment

Personal protective equipment protects against risks
arising from the material being processed .
If the workplace or the process in which the device is
t
being used requires personal protective equipment:
Wear personal protective equipment .
Entris
BCE Operating Instructions
®
Safety Instructions
7

Publicité

Table des Matières
loading

Table des Matières