"Applic ."/"Count" Menu; Applic ."/"Percent" Menu; "Applic ."/"Net . T Ot ." Menu; "Applic ."/"Total" Menu - Sartorius Entris II BCE Série Mode D'emploi

7 .3 . 1 0 "APPLIC ."/"COUNT" Menu

Parameter Setting values
RESOLUT . DISP .ACC .*
10-FOLD
100 .FOLD
REF .UPDT . OFF*
AUTO
* Factory setting
7 .3 . 1 1

"APPLIC ."/"PERCENT" Menu

Parameter Setting values
DEC .PLCS NONE
1 DEC .PL .*
2 DEC .PL .
3 DEC .PL .
* Factory setting
7 .3 . 1 2

"APPLIC ."/"NET . T OT ." Menu

Parameter Setting values
PRT .COMP . OFF
ON*
* Factory setting

7 .3 . 1 3 "APPLIC ."/"TOTAL" Menu

Parameter Setting values
PRT .COMP . OFF
ON*
* Factory setting
Explanation
Sets the resolution to "display resolution" . The "Counting" application is started
with the displayed value .
Sets the resolution to 10-times more accurate than "display resolution" .
Sets the resolution to 100-times more accurate than "display resolution" .
Deactivates automatic reference sample updating .
Activates the automatic reference sample updating .
Explanation
The result of the "Weighing in Percent" application is displayed without decimal
places .
The result of the "Weighing in Percent" application is displayed to 1 decimal
place .
The result of the "Weighing in Percent" application is displayed to 2 decimal
places .
The result of the "Weighing in Percent" application is displayed to 3 decimal
places .
Explanation
Deactivates the component printout .
Activates the component printout .
Explanation
Deactivates the component printout .
Activates the component printout .
System Settings
Entris BCE Operating Instructions
®
25