Operating The Hood - AVG AVI-366IS3 – IOWA Instructions D'installation Et Guide De L'usager

Hotte îlot
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

OPERATING THE HOOD

 
 
 
 
 
 
   
 
 
 
 
 
TIMER/POWER BUTTON (K1)
Press timer/Power button (K1) once to turn on the system. 
Press the plus sign "+" to activate the hood, press timer (K1) again and start power-off delay 
timer. Use the plus "+" (K4) and minus "-" (K3) to set delay timer period (1 to 10 minutes). Once 
the set time is terminated, the hood will shut itself off. If you need to stop it before time 
elapses, simply press timer (K1) again. 
 
 
BLOWER SPEED INDICATOR (K3 & K4)
The plus sign "+" button (K4) turns the blower on to three (3) speeds settings: lowest to strongest. The 
minus sign "-" button (K3) goes from strongest to the lowest. Press the clock/timer (K1) once to turn 
the LCD screen on and use speed button "-" (K3) to decrease and the "+" button (K4) to increase the 
speed until desired speed is attained. 
Low speed: used for light frying/boiling. 
Medium speed: used for frying/ heavy boiling. 
High speed: used when grilling, intensive frying and wok cooking.
ADJUSTING THE TIMER SETTING (K1)
This button is used to set time and time is displayed in a 24-hour cycle. To set the timer, press the timer 
button (K1) for four (4) seconds. The first two digits will flash. Use the "–" button (K3) to decrease and 
the "+" button (K4) to increase. Press the time/delay button (K1) again; the last two digits will flash. 
Use the "–" button (K3) to decrease and the "+" button (K4) to increase. Press the time/delay button 
(K1) again to confirm and exit the time setting mode or wait five (5) seconds and it will automatically 
exit. 
ADJUSTING THE LIGHT(K2)
(K2) once to turn the lights on and Press the Light button once again to turn the lights off
 
 
 
 
 
 
K4 
K3 
    25 
 
K2 
K1 
.
 

Publicité

Chapitres

Table des Matières
loading

Table des Matières