Electrical Installation; Clothing Precautions; Safety Instructions Relating To Installation; Regulations - SOMFY ELIXO SMART io Manuel D'installation

EN
Figure 1 - Safety distance
d ≥ 500 mm

1.5. Electrical installation

DANGER
The installation of the power supply must comply with
the standards in force in the country in which the drive is
installed, and must be carried out by qualified personnel.
The electric line must be exclusively reserved for the
drive and equipped with protection, comprising:
• a 10 A fuse or breaker,
• a differential type device (30 mA).
An all-pole power supply cut-off device must be provided.
The switches provided to ensure a cut-out of all poles on
fixed appliances must be connected to the power supply
terminals, and there must a separation between the
contacts on all poles to ensure complete disconnection
under overvoltage category III conditions.
It is recommended that you fit a lightning conductor
(mandatory maximum residual voltage 2 kV).
1.5.1. Cable run
DANGER
Underground cables must be equipped with a protective
sheath with a sufficient diameter to contain the motor
cable and the accessories cables.
Low-voltage cables subject to inclement weather must be at
least of type H07RN-F.
For overground cables, use a cable grommet that will
withstand the weight of vehicles (ref. 2400484).

1.6. Clothing precautions

Take off any jewellery (bracelet, chain, etc.) during installation.
For manoeuvring, drilling and welding operations, wear
appropriate protection (special glasses, gloves, ear protection,
etc.).

1.7. Safety instructions relating to installation

DANGER
Do not connect the drive to a power source before
installation is complete.
WARNING
Modifying any of the components in this kit or using
additional components not recommended in this manual
is strictly prohibited.
Monitor the gate as it moves and keep people away from it
until installation is complete.
Do not use adhesive to mount the drive.
3
d ≥ 200 mm
A er installation, ensure that:
• the mechanism is correctly set,
• the manual unlocking device is operating correctly,
• the drive changes direction when the gate encounters an
1.7.1. Safety devices
For operation in automatic mode, or if the gate opens out onto
a public road, installation of an orange light may be required
in accordance with the regulations in the country in which the
drive has been commissioned.

1.8. Regulations

Somfy declares that the product described in these instructions,
when used in accordance with these instructions, complies
with the essential requirements of the applicable European
directives and, in particular, with the Machinery Directive
2006/42/EC and the Radio Equipment Directive 2014/53/EU.
The full text of the EC declaration of conformity is available at
the following website: www.somfy.com/ce.
Antoine CREZE, Head of Regulations, Cluses

1.9. Assistance

You may encounter difficulties or have questions when
installing your drive.
Do not hesitate to contact us; our specialists are on hand to
answer all your questions. Internet: www.somfy.com
WARNING
Take care when using the manual unlocking device.
Manual unlocking may result in uncontrolled movement
of the gate.
NB
Install any fixed control device at a height of at least 1.5
m and within sight of the gate, but away from moving
parts.
object 50 mm high positioned halfway up the leaf.
WARNING
For operation in automatic mode or remote control,
photoelectric cells must be installed.
The automatic drive operates in at least one direction with
no intentional activation by the user.
Copyright © 2018 SOMFY ACTIVITES SA. All rights reserved.
io Elixo Smart