Before Using For The First Time And Once A Day - Medela Harmony Mode D'emploi

5. Cleaning
Caution
14
I Do not drop the parts of the
pump set into boiling water.
I To avoid contamination, do not
touch the inside of the parts after
sterilisation.
l Take apart and wash all parts
that come in contact with the
breast and breast milk
imme diately after use to avoid
drying up of milk residues and
to prevent growth of bacteria.
l Only use drinking-quality water
for cleaning.
Note
l When you boil the parts of the
pump set, you could add a tea -
spoon of citric acid to avoid a
build-up of limescale.
When you use citric acid, minor
traces might remain on the pump
parts. Use drinking-quality water
to wash them off. Dry the parts as
shown in figure 3 to the right.
5.2 Before using for the
first time and once a day
1
1
Disassemble the pump set
into its individual parts.
3
Dry with a clean cloth or leave to
dry on a clean cloth. Store the
clean parts in an air-permeable,
clean bag/container, or in an
air-permeable, clean paper/cloth
until next use.