MDR .. EC
1. Remove mounting material from the stud
bolt [4].
2. Screw the earthing strap [7] to the stud bolt
[4]. NOTICE: For a secure contact, place the
tooth lock washer under the earthing strap,
place the washer over the earthing strap
and tighten with the lock nut.
3. Connect the free end of the earth conduc-
tor/earthing strap to the roof socket.
12 Electrical connection
Observe the relevant regulations (EN 50110-1
and EN 60204-1), in Germany especially VDE
0100 with the corresponding parts. Before
starting work on the electrical system, switch
off the mains fuse and secure it against being
switched on again (padlock).
FIG
DE
UK
VENTILATOREN
FR