MDR .. EC
cable diameter max. 12 mm. Recommendation:
For cable cross-sections of 1.5 to 2.5 mm²,
separate the empty conduit from the elbow,
see Chapter 10.
● Install suitable insulation and sealing material
between roof flashing and roof socket.
● For the duct connection, use a Maico ELA
flexible sleeve with matching nominal size.
● During installation of fans, with an MDR-P
controller, on a flat roof (without a roof
socket) make a pressure tap in the supply
air channel and connect it with the MDR-P
controller
connection set [21].
FIG
Fig. J, Connection with pressure
DE
UK
VENTILATOREN
FR