Correct Weighing - Seca 952 Mode D'emploi Et Garantie

– The rear casters can be locked if you
push down the two locking levers on
the casters. This device should be used
when the patient is sitting down on the
scale or getting up from it.
– Once the person who is to be weighed
is seated, the foot-rests are tilted down-
wards. The patient can now place his or
her feet on the foot-rests.

Correct weighing

– Press the start key with no load on the
scale.
se(a 8. 8 . 8 . 8 . 8 .
, and
utively in the display. The scale is then
automatically set to zero and ready to
use.
– If necessary, switch the weight display
(see page 14).
– Get the patient to sit on the scale.
– The patient's weight can only be deter-
mined once he or she is no longer in
contact with the floor. Be sure, there-
fore, that the patient's feet are on the
foot rest throughout the weighing oper-
ation.
– Read the weighing result off the digital
display.
– If a load greater than 200 kg is placed
StoP
on the scale,
play.
– To switch off the scale, press the start
key again.
Model 952
0. 0
appear consec-
appears in the dis-
stop
Locking lever
13