Technical Data - Seca 952 Mode D'emploi Et Garantie

– If there has been no activation of a function beforehand, remove the load from the scale
0. 0
and wait until
Er
... the display
– Switch off the scale with the Start key and start the scale again. The scale will then
work normally again.
If this is not the case, disconnect the power supply by briefly removing the batteries. If
this measure is equally unsuccessful, inform the Service department.
7. Servicing
Your seca scale leaves the factory with an accuracy greater than ±0,1 %/±100 g. To ensure
that this accuracy is maintained, the product must be carefully set up and regularly main-
tained. Depending on the frequency of use, we recommend servicing every 3 to 5 years.
Please ensure that a qualified service agent is used. If in doubt, contact seca Customer
Service for further information.

8. Technical data

Maximum load
Minimum load
Graduations
Dimensions
height:
width:
depth:
Height of figures
Weight
Temperature range
Power supply
Batteries
Power consumption
EN 60 601-1:
medical electrical equipment type B:
Accuracy
Functions
16
is displayed, then weigh again.
and a number appear (e.g.
Er:12
)?
200 kg / 440 lbs / 32 sts
1 kg
100 g / 0.2 lbs
920 mm
565 mm
810 mm
20 mm
approx. 24.5 kg
+10 °C to +40 °C
batteries
6 type AA 1.5 V batteries
approx. 25 mA
greater than ±0,1 %/±100 g
Switch between units, NET, Auto-hold