Making The Plant Ready For Operation; Commissioning - Kessel InnoCleanPLUS EL 80 Instructions De Montage

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 47
Instruction / hand-over
The chapter "Safety instructions" must be heeded! (p. 2)
Commissioning is carried out by a specialised firm or by an aut-
horised KESSEL agent (at an additional charge).
The following persons should be present for the hand-over:
- Person authorised to perform the acceptance on behalf of the
building owner
- Specialised firm
In addition, we recommend the participation of operating per-
sonnel/operator, waste disposal contractor
Overview instruction:

5. 1. Making the plant ready for operation

5. 2. Checking the plant
5. 3. Instruction based on the installation and operating in-
structions
5. 4. Drawing up the handover certificate. (see chapter 13)
Once the instruction is completed, the plant must be made
ready for operation.
5.1 making the plant ready for operation
Prior to commissioning, the plant must be completely cleaned
(including inlets and drains); solids and coarse particles must
be removed.

5. Commissioning

Both chambers of the plant must be filled UP with clear water
(see page 110).
Display/indicator panel
Movement keys/direction keys for guidance
through the program menu
Enter key/OK key
Back key/ESC key
Pilot lamp indicating readiness for operation
Pilot lamp for malfunction message
Power supply cable for control unit
Mains connection compressor
Connection compressed air sensor (optiional
accessoires)
Connection options for external signal
generator
Connection for valve block
Connecting socket for floating contact
0.
System start
Systemstart
System diagnostic
Systemdiagnose
0.1
0.2
0.3
0.4
System information
1.5
Systeminfo
Time:
20:45
Uhrzeit:
20:45
Floater: S1
Schwimmer: S1
S2
Events
Main power failure
Ereignisse:
Netzausfall
Normal phase
Normalphase
der Anlage fragt das Steuergerät nach vier Grund
I
114
Bewegungstasten / Richtungstasten kann die gewünsc
ü
einen Markierungsbalken gekennzeichnet werden und die Anschließe
Language
Sprache
deutsch
German
französisch
englisch
French
English
Date/Time
Datum/Uhrzeit
Date
Datum
01.01.02009 Time
01.01.2009 Uhrzeit
12:00
12:00
Classes
Klassen
C
D
Nominal Size
Nenngrößen
EW4
EW6
EW8
EW10
...
EW24
die Frage nach

Publicité

Table des Matières
loading

Table des Matières