Anomalies And Remedies - Olimpia splendid Unico Air 20 SF Mode D'emploi Et D'entretien

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 83

4.3.5 - Anomalies and remedies

Malfunctioning
The unit will not start.
The appliance doesn't cool/heat
sufficiently anymore.
If the problem has not been solved, please contact the nearest technical assistance service.
Please give detailed information about the malfunction and on the equipment version.
Cause
Current failure
The unit is disconnected from the
current.
The fuse is interrupted or the ther-
mal-magnetic circuit breaker has
tripped.
The remote control batteries may be
discharged.
The time set with the timer may not
be correct.
Incorrect temperature setting.
The air filter is dirty.
The doors or windows are open.
The air inlet or outlet vents of the
indoor or outdoor units are blocked.
What must be done?
Wait for the current to be restored.
Check that the plug is inserted in the
wall socket.
Replace the fuse or restore the ther-
mal-magnetic circuit breaker.
Replace the batteries.
Wait or annul the timer setting.
Set the temperature correctly. Consul
the "Using the remote control" chapter
for the procedure.
Clean the air filter.
Close the doors or windows.
First, remove the obstructions and
then re-start the unit.
UNICO AIR
INVERTER R32
EN - 33

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Unico air 20 hp evaUnico air 25 sfUnico air 25 hp eva

Table des Matières