Description Of The Appliance; List Of The Components Supplied; Storage; Receipt And Unpacking - Olimpia splendid Unico Air 20 SF Mode D'emploi Et D'entretien

1 - DESCRIPTION OF THE APPLIANCE

1.1 - LIST OF THE COMPONENTS SUPPLIED

T h e u n i t s m a k i n g u p t h e c l i m a t e c o n t r o l s y s t e m a r e p a c k a g e d i n d i v i d u a l l y i n
cardboard boxes.
Individual unit packages can be transported by hand by two members of personnel, or loaded onto a transport
trolley; up to max. three packages stacked for indoor units and individually for outdoor units.
Before beginning to assemble the unit, make sure all the parts are within easy reach.
A. Appliance UNICO Air R32
T1. Remote control*
T2. Remote control*
C. Use and maintenance booklets + warranty
D. Strip of adhesive isolating tape (x 2)
E. Kit of screws and anchor bolts
F. Air inlet and outlet external grids including chains
and kit for installing the grids (x 2)
The batteries (T3) for the remote control, quantity 2 - 1,5V AAA type, are components necessary
but not supplied as a standard.

1.2 - STORAGE

Store the cartons in a closed environment protected against atmospheric agents and raised off the floor by
planks or a pallet.
DO NOT TURN THE PACKAGING UPSIDE DOWN NOR PLACE IT HORIZONTALLY.

1.3 - RECEIPT AND UNPACKING

The packaging is made up from suitable material and performed by expert personnel.
The units are delivered complete and in perfect condition. However, for he quality control of the transport
services, follow the warnings below:
a. On receipt of the packages, check whether the packaging is damaged. If this is the case, withdraw the
goods with reserve, producing photographic proof and any apparent damage.
b. Unpack, checking the presence of the individual components with the packing lists.
c. Control that all components have not undergone damage during transport. If this is the case, inform the
carrier by registered letter with acknowledgement of receipt within 3 days of receiving the goods, presenting
photographic documentation.
d. Pay attention when unpacking and installing the equipment.
Sharp parts can cause injury. Pay particular attention to the edges of the structure and the fins of
the condenser and evaporator.
No information concerning damage undergone can be taken into consider-
ation after 3 days from delivery.
For any controversy the court of jurisdiction will be BRESCIA.
G. Internal flanges (x 2)
H. Sheet for wall pipes (x 2)
L. Hook for wall anchoring (quantity 2)
M. Paper template to make holes
N. Condensation drain pipe
* Check the model supplied
UNICO AIR
EN - 11
INVERTER R32