immediately, potentially leading to falling
down or causing passenger(s) to be thrown
overboard.
Tiller handle type
1. Be sure to install the stop switch lock
to the stop switch, and attach the stop
switch lanyard securely to the operator
or to the operator's PFD (Personal Flo-
tation Device.)
1
1. Stop switch lock
2. Set the control lever in the Neutral
position.
R
1. Shift lever
ENOF00516-0
N
F
1
ENOF00531-1
ENGINE OPERATION
3. Set the throttle grip to START position.
1. Throttle grip
4. Pull the choke knob fully.
5.
1. Choke knob
ENON00501-0
Note
Choke is not necessary when the engine is
warm. Set the throttle grip to "RE-START"
position.
ENON00502-0
Note
If engine does not start with 4 or 5 times
starting operation, push the knob back and
restart.
(For manual starter type)
This engine is equipped with a compres-
sion release mechanism.
1
ENOF01107-0
1
ENOF00518-0
37
7