Installation Of Safety Block Into The Actuator Drive - Burkert LCIE 07 ATEX 6078 X Instructions De Service

Type 3004
Option: Rotary actuators with
emergency current model
Description of LED status
LED Status
Green lit
flashing
Red lit
flashing
9.4.

Installation of safety block into the actuator drive

Figure 27: Illustration: installation of safety block into the actuator drive
→
Fasten the safety block of the emergency current model onto the actuator drive with 4
(see illustration "Figure 27").
→
Connect the battery in this order:
1. F+ (wire color red)
2. E- (wire color black)
→
Connect the power supply in this order:
1. terminal 18
2. terminal 17
(see "Figure 26: Illustration: Electronic printed circuit board").
Description
Mains power operation
Battery operation
Battery is charged
Battery is being charged
4 fastening screws ST2.2 x 6.5
English
33