Lighting The Burners - Steel Cucine B9C-4 Manuel D'utilisation

UK
Use

Lighting the burners

Each knob indicates the corresponding burner (see "The control panel (Caddie / Swing)" on page 54 and
"The control panel (Green)" on page 58).
1) Press the knob and turn the indicator to the symbol
simultaneously. To generate other discharges, hold down the knob while turning the indicator repeatedly
to the symbol .
2) Once the burner is lit, turn the indicator to position
maximum setting.
3) To adjust from maximum to minimum setting, turn the knob from
4) To switch off the burner return the indicator to
while holding down the knob. Release the knob.
1
IF THE BURNER DOES NOT LIGHT, RETURN THE KNOB TO
TO (BURNER OFF) WHILE HOLDING DOWN THE KNOB. WAIT A FEW SECONDS TO ALLOW THE GAS
EMITTED TO DISPERSE AND THEN REPEAT POINTS 1 TO 3.
TO CHECK THE BURNERS HAVE TURNED ON, LOOK FOR THE FLAME THROUGH THE SLOTS IN THE GRILLS.
30 68
; press the knob and turn the indicator to
2
: the ignition clicks and the pilot light switches on
. Release the knob: the burner is now on the
to .
3
; PRESS THE KNOB AND TURN THE INDICATOR
(burner off)
4