Gas Connection For Top Version - Steel Cucine B9C-4 Manuel D'utilisation

UK
Installation

Gas connection for top version

THE APPLIANCE IS ALREADY REGULATED TO OPERATE WITH LPG (G30/31 AT 28-30/37MBAR, CATEGORY
II2H3+).
LPG
NEVER CONNECT THE PIPES DIRECTLY TO THE GAS BOTTLE: A PRESSURE REGULATOR MUST ALWAYS
BEEN INTERPOSED.
1) Unscrew the 4 screws "A" and remove the sheet "B" at the back of the barbecue.
2) Provide a gas pipe of 800 mm length. You may need a pipe holder "H" on the end of the ramp "E".
3) Connect the end "G" of the gas pipe directly to the ramp "E" or to the pipe holder "H".
4) Connect the end "I" of the gas pipe to the pressure regulator "C".
5) Connect the gas pressure regulator "C" to the threaded union "D" on the bottle.
6) After connecting, refit the rear sheet "B".
AFTER CONNECTING, ENSURE THE RUBBER PIPE IS NOT CRUSHED, HANGING OR OBSTRUCTING.
A B
C I G
H
D
E
The symbols in the picture mean that on those points a clamp could be necessary.
11
49