SPERONI CAM 40 Mode D'emploi page 14

GARDEN PUMPS GARDEN PUMPS
1. Safety Measures 1. Safety Measures
• Read carefully the operating instructions before assembling • Read carefully the operating instructions before assembling
and starting. The appliance must not be used by operators and starting. The appliance must not be used by operators
who are not thoroughly acquainted with the instructions who are not thoroughly acquainted with the instructions
handbook (operating instructions). Moreover, the appliance handbook (operating instructions). Moreover, the appliance
must not be used by persons under the age of 16. must not be used by persons under the age of 16.
• The user is liable towards third parties in the area where • The user is liable towards third parties in the area where
the appliance is in operation. the appliance is in operation.
• Before starting it is necessary to check that the necessary • Before starting it is necessary to check that the necessary
electrical protection measures are met, by means of a electrical protection measures are met, by means of a
test carried out by a specialist. test carried out by a specialist.
WHILST using the pump, there should be WHILST using the pump, there should be
no person in the water or liquid to be no person in the water or liquid to be
pumped, and the carrying out of any type pumped, and the carrying out of any type
of maintenance is strictly forbidden. of maintenance is strictly forbidden.
The pump may be connected only by means of a The pump may be connected only by means of a
safety switch for fault currents, with an opening safety switch for fault currents, with an opening
rated current up to 30 mA and a socket with an rated current up to 30 mA and a socket with an
earth contact in compliance with the regulations. earth contact in compliance with the regulations.
Protection: at least 10 Amps. Protection: at least 10 Amps.
Operation in swimming pools and garden ponds is not Operation in swimming pools and garden ponds is not
recommended. recommended.
For other operation, the provisions in conformity with For other operation, the provisions in conformity with
the standard VDE 0100 part 702 must be respected. the standard VDE 0100 part 702 must be respected.
CAUTION: Before checking, unplug the pump CAUTION: Before checking, unplug the pump
from the mains! from the mains!
Replacing the power supply cable requires using Replacing the power supply cable requires using
special tools and therefore you must address to the special tools and therefore you must address to the
authorized after-sales service. authorized after-sales service.
The pump may only operate with an extension The pump may only operate with an extension
obtained through cable mod. H07 RNF and a thread obtained through cable mod. H07 RNF and a thread
section of no less than 1 mm in compliance with the section of no less than 1 mm in compliance with the
DIN 57282 or DIN 57245 standard. DIN 57282 or DIN 57245 standard.
• The noise (continuous equivalent in dbA) of • The noise (continuous equivalent in dbA) of
the motor-driven pumps is less or equal (≤) to the motor-driven pumps is less or equal (≤) to
70 dbA. 70 dbA.
• The voltage (230 Volts alternating current) • The voltage (230 Volts alternating current)
indicated on the pump rating plate must correspond to indicated on the pump rating plate must correspond to
the available mains voltage. the available mains voltage.
• The temperature of the liquid conveyed must not exceed • The temperature of the liquid conveyed must not exceed
35°C. 35°C.
• Never attempt to lift or move the pump by stretching the • Never attempt to lift or move the pump by stretching the
power-supply cable whilst it is plugged into the mains. power-supply cable whilst it is plugged into the mains.
• Make sure that the plugged electrical connections are in • Make sure that the plugged electrical connections are in
an area safe from flooding and are protected from humidity. an area safe from flooding and are protected from humidity.
• Before use it is necessary to check that the plug and • Before use it is necessary to check that the plug and
the mains connection line are not damaged. the mains connection line are not damaged.
• Unplug from the mains before performing any work on • Unplug from the mains before performing any work on
the pump. the pump.
• Avoid directly exposing the pump to the jet of water. • Avoid directly exposing the pump to the jet of water.
• The user is responsible for complying with the local • The user is responsible for complying with the local
regulations concerning assembly and safety. regulations concerning assembly and safety.
• The user by taking appropriate measures (e.g. installing • The user by taking appropriate measures (e.g. installing
an alarm, reserve pump and the like) will have to exclude an alarm, reserve pump and the like) will have to exclude
the possibility of indirect damage caused by flooding the possibility of indirect damage caused by flooding
premises due to failure of the pump. premises due to failure of the pump.
• In the event of the pump failing, repair work may only • In the event of the pump failing, repair work may only
be carried out by the repair workshops of the technical be carried out by the repair workshops of the technical
service. Only genuine spare parts must be used. service. Only genuine spare parts must be used.
• It is notified that in conformity with the law on product • It is notified that in conformity with the law on product
liability liability
we cannot be held responsible we cannot be held responsible
for the damage caused by our appliance: for the damage caused by our appliance:
a) because of improper repairs not carried out by the a) because of improper repairs not carried out by the
personnel of the assistance points authorized by us; or personnel of the assistance points authorized by us; or
b) if GENUINE SPARE PARTS are not used to replace b) if GENUINE SPARE PARTS are not used to replace
parts; or parts; or
c) if the indications and provisions given in the instructions c) if the indications and provisions given in the instructions
handbook are not complied with. handbook are not complied with.
The same provisions hold for the accessories. The same provisions hold for the accessories.
Resistance Resistance
This pump should not be used to convey inflammable, This pump should not be used to convey inflammable,
combustible or explosive liquids. combustible or explosive liquids.
2. Use 2. Use
Sector of use Sector of use
CAUTION! CAUTION!
• For irrigation and watering of lawns, gardens, • For irrigation and watering of lawns, gardens,
vegetable patches, etc. vegetable patches, etc.
• For operating garden sprinkler systems • For operating garden sprinkler systems
• For drawing water from ponds, streams, water butts • For drawing water from ponds, streams, water butts
and wells, subject to fitting of suitable filter. and wells, subject to fitting of suitable filter.
Acceptable liquids Acceptable liquids
In order to pump clear water (fresh water), rainwater In order to pump clear water (fresh water), rainwater
or non-aggressive chemical cleaning solutions. or non-aggressive chemical cleaning solutions.
Abrasive liquids or any other type of corrosive Abrasive liquids or any other type of corrosive
liquid could damage or destroy the pump. liquid could damage or destroy the pump.
Operating Instructions Operating Instructions
Generally speaking it is recommended to use a Generally speaking it is recommended to use a
preliminary filter and exhauster with a suction preliminary filter and exhauster with a suction
hose, suitable and foot valve (reflux lock) to avoid hose, suitable and foot valve (reflux lock) to avoid
long suction times and pointlessly damaging the long suction times and pointlessly damaging the
pump due to stones and solid foreign bodies. pump due to stones and solid foreign bodies.
14 14