Güde KS 401 BW Traduction Du Mode D'emploi D'origine page 34

ENGLISH
30 • Spare bars and saw chains specified by the
manufacturer to be used at all times. Wrong spare
bars and saw chains may lead to chain overloading
and/or backlash.
• Follow the manufacturer instructions for chain-
saw sharpening and maintenance. Too low depth
limiters increase the tendency to back impact.
Observe national regulations and instructions for
chain saws operation.
Take care to prevent from fuel and oil leakage during
transport.
BThe dust that arises when working with this tool can
be detrimental to health and therefore not reach the
body. Wear a suitable dust protection mask.
Other safety instructions
Provide adequate lighting or good lighting conditions
when working with the machine.
Be careful when going backwards – risk of
tripping!
Do not run!
knots from the work area to prevent injuries. Watch
out for falling branches!
The ON/OFF switch and safety switch must not be
locked.
Before using, check the tightness and proper
seating of all screwed and socket joints and
protective equipment and if all moving parts are
moving smoothly.
It is strictly prohibited to demount, adjust and
alienate the protective equipment on the
machine or put other protective equipment on
the machine.
Do not use the appliance if damaged or the
safety equipment is defective. Replace any worn
and damaged parts.
Maintenance
Switch the engine off and remove the socket
plug before any work on the engine.
Repairs and works specified in these Instructions may
only be performed by qualified authorised staff.
Use only original accessories and original spare parts.
Biodegradable oil for chains to be used only.
Keep the device, in particular the air vents, clean at all
times. Never spray water on the device body!
Never clean the machine and its components with
solvents, flammable or toxic liquids. Us only a damp
cloth making.
Immediately remove cut branches/
Apply environment-friendly oil to all moving parts.
After each use, clean the saw and sword chain careful-
ly. Wipe it with a cloth moistened in oil or apply metal
treatment spray on it.
Blunt, bent or damaged chains and swords must be
replaced.
Only a regularly maintained and treated appliance
can serve as a satisfactory aid. Insufficient mainte-
nance and care can lead to unforeseen accidents and
injuries.
If necessary, a list of spare parts can be found at www.
guede.com.
Machine to be stored in a dry place.
Disposal
The disposal instructions are based on the icons
placed on the appliance or its package.
Any damaged or disposed devices must
be delivered to appropriate collection
centres.
Transport packaging disposal
The packaging protects the machine against damage
during transport. Packaging materials are usually
chosen based on environment aspects and waste
treatment principles and are therefore recyclable. Re-
turning the packaging into material circulation saves
raw materials and reduces waste production. Parts of
packagings (e.g. foils, styropor®) can be dangerous
for children.
Risk of suffocation!
Keep parts of the packagings out of reach of children
and dispose them as soon as possible.
Dispose the waste oil in an environment-friendly
manner!
Guarantee
Warranty period of 12 months applies to commercial
use and 24 months applies to private use and com-
mences on the day of purchase of the device.
The guarantee solely covers inadequacies caused
by material defect or manufacturing defect. Original
payment voucher with the sales date needs to be sub-
mitted for any claim in the guarantee period.
The guarantee does not cover any unauthorised
use such as appliance overloading, use of violence,
damage as a result of any unauthorised interference
or caused by foreign items. Failing to follow the
operating and assembly instructions and common
wear are also not included in the guarantee.