Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
28
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
In case of any doubts about connection and operation
refer please to our customer center
delivered items
1
Chain break / Front hands protection
2
Handle
3
Bowden starter
4
Choke
5
Safety switch
6
throttle-lever
7
ON/OFF switch
8
Fuel top-up funnel
9
Chain oil top-up funnel
10
Saw chain
11
Saw bar
Specified Conditions Of Use
The chainsaw may only be used for cutting wood –
across the fibres, with regard to the technical specifi-
cations and safety instructions.
Do not use this product in any other way as stated
for normal use. Not observing general regulations
in force and instructions from this manual does not
make the manufacturer liable for damages.
Use the appliance only outside, never use it
in confined and bad ventilated areas.
Requirements for operating staff
The operating staff must carefully read the Opera-
ting Instructions before using the appliance.
Qualification: Apart from the detailed instructions
by a professional, no special qualification is necessary
for appliance using.
Minimum age: Persons over 18 years of age can
only work on the appliance. An exception includes
youngsters trained in order to reach knowledge
under supervision of the trainer during occupational
education.
Training: Sawing and felling, as well as all related
work may only be carried, who is doing very educated
and trained.
Those who have no experience with the chainsaw or
denArbeitstechniken, should not perform this work.
Read and understand the
operating instructions before using
the appliance. Familiarise with the
First-time users are advised to practice cutting round
wood on a sawhorse.
The operator is responsible for accidents or risks to
third parties.
Residual risks
Danger of injury !
Contact with the saw chain can cause casualties.
Never touch moving chain by hands.
Danger of kickback !
Kickback can lead to casualties.
Danger of burns !
Chain and guiding groove warm up in operation.
Risk of poisoning!
Toxic exhaust fumes and oil vapors can cause
poisoning.
Emergency procedure
Conduct a first-aid procedure adequate to the injury
and summon qualified medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. For the sake of eventual
accident, in accordance with DIN 13164, a workplace
has to be fitted with a first-aid kit. It is essential to
replace any used material in the first-aid kit immedia-
tely after it has been used. If you seek help, state the
following pieces of information:
1. Accident site
2. Accident type
3. Number of injured persons
4. Injury type(s)
Symbols
Warning/caution!
Read the Operating Instructions
Wear eye protective goggles !
Wear ear protectors!
Wear protective helmet !
Wear protective gloves !
Wear safety cut through resistant shoes
with safety sole and steel toe !
Publicité
