Maintenance And Use; Computer - PowerPeak Home Trainer Magnetic Mode D'emploi

MAINTENANCE AND USE
• This device requires a regular check‐up to prevent physical injury. This means that bolts and nuts
should be frequently checked for cracks and sharp edges etc.
• Defective components must be replaced immediately. If this is not possible, the device must be put
out of order until the necessary repairs have been made.
• Clean only with a damp cloth, do not use solvent cleaners.
• This product is intended for use in clean, dry conditions. You should avoid storage in excessively cold
or damp places as this may lead to corrosion and other related problems.
COMPUTER
Turn computer on
Press a key or move the pedals to start the computer. There will be a sound signal the moment the LCD
display is turned on.
Note: if the computer does not receive a signal for more than 4 minutes, the computer will
automatically switch to sleeping mode.
Keys
RECOVERY: measuring your condition.
BODY FAT: measuring your body fat percentage.
UP: with this key you can set the value of the functions GENDER, AGE, HEIGHT, WEIGHT, TIME,
DISTANCE, CALORIES and PULSE.
DOWN: with this key you can set the value of the functions GENDER, AGE, HEIGHT, WEIGHT, TIME,
DISTANCE, CALORIES and PULSE.
MODE: with this key you can:
1. confirm selected values
2. go through all values
3. reset values to '0' by holding this key for 2 seconds
Specifications
TIME: 0:00 – 99:00 minutes
DISTANCE: 0,0 – 99,5 km
CALORIES: 0 – 990 Kcal
PULSE: 0 – 240 beats per minute
REVOLUTIONS PER MINUTE (R.P.M.): 0 – 250 revolutions
27