PowerPeak Home Trainer Magnetic Mode D'emploi page 24

Step 3: assembling the handlebar post and connecting the resistance and computer cable
Put the handlebar post (72) in a vertical position. Place the plastic cover (70) over the lower part of the
handlebar post (72). Keep the upper computer cable (71) hanging from the handlebar post until it is
connected.
Connect the upper computer cable (71) with the lower computer cable (69).
Connect the upper resistance cable (39) with the lower resistance cable (75).
Put the handlebar post (72) in the main frame (66) and secure the handlebar post (72) with four curved
washers (63), four spring washers (67) and four allen bolts (68).
58
7
56
39
72
71
70
69
75
67
38
68
24