Assembly - PowerPeak Home Trainer Magnetic Mode D'emploi

ASSEMBLY
In order to familiarise yourself with the parts of the device, we advise you to study the overview picture
and the parts list carefully before you start assembly. Place all the parts on the floor and remove all
packaging materials.
Step 1: assembling the front and rear stabiliser
Attach the front stabiliser (65) to the main frame (66) with two carriage bolts (42), two curved washers
(38) and two cap nuts (37).
Attach the rear stabiliser (41) to the main frame (66) with two carriage bolts (42), two curved washers
(38) and two cap nuts (37).
Step 2: assembling the pedals
Attach the left pedal (31 L) to the left crank (34 L).
Attach the right pedal (31 R) to the right crank (34 R).
23