Wearing Parts; Warranty - Solo 456 Instructions D'emploi

Pulvérisateur à pression
Masquer les pouces Voir aussi pour 456:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 30
9 Wearing parts / 10 Warranty

9 Wearing parts

Various parts are subject to application-specific wear or to normal wear and must be replaced in good time
if necessary.
The following parts are subject to normal wear and are not covered by the manufacturers guarantee:
x All rubber parts that come into contact with the spraying agent
x Spray nozzle
x Filters
x Seals

10 Warranty

We warrant problem free quality and will cover the cost of replacing parts which are found to be faulty in
material or show manufacturing defects within the prescribed guarantee period after the date of purchase.
Please note that specific guarantee conditions may differ from country to country. When in doubt, please
ask the vendor of the goods. The vendor of the product is responsible for guarantee applications.
We hope you will understand that we cannot be liable for damage resulting from these causes:
x Non-compliance with operating instructions.
x Neglecting required maintenance and repair jobs.
x Wear from normal use (particularly: gasket seals, membranes, collars, spray nozzles and filters).
x Using non-approved tools.
x Use of force, improper treatment, misuse and accidents.
x Attempted adjustments and repairs by non-qualified persons.
x Unauthorized modification or changes made to the device.
x Use of unsuitable spare parts or non-original parts if such parts are the cause of the damage.
x Use of non-approved media in the spraying agent tank.
x Damage caused by using the product in the hire or rental industry.
Normal cleaning, adjustments or maintenance jobs cannot be claimed as part of the guarantee.
All guarantee work must be carried out by one of our authorised service centres.
For Australia only: Supplementary warranty notes specifically for Australia
To make a claim, contact Clayton Engineering, 26 French Ave, Brendale, Q, 4500 on phone 1300 798 022
or email sales@claytonengineering.com.au. You will be asked to provide proof of purchase and then will
be instructed on the procedure for repairing or replacement of the product under warranty. All costs
incurred for repair or replace, and additional claims can be discussed at this stage.
This warranty is provided in addition to other rights and remedies you have under law: Our goods come
with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss
or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure.
ENGLISH 14

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

457456 pro

Table des Matières