Warranty; Wearing Parts - Solo 416 Notice Originale

9. Warranty

The manufacturer guarantees problem free quality
and will cover the cost of replacing parts which are
found to be faulty in material or show
manufacturing defects within the prescribed
guarantee period after the date of purchase.
Please note that specific guarantee conditions
may differ from country to country. When in doubt,
please ask the vendor of the goods. The vendor of
the product is responsible for guarantee
applications.
We hope you will understand that we cannot be
liable for damage resulting from these causes:
 Non-compliance with operating instructions.
 Neglecting required maintenance and repair
jobs.
 Wear from normal use.
 Using non-approved tools.
 Use of force, improper treatment, misuse and
accidents.
 Attempted adjustments and repairs by non-
qualified persons.
 Use of unsuitable spare parts or non-original
parts if such parts are the cause of the
damage.
 Use of non-approved media in the solution
tank.
 Damage caused by using the product in the
hire or rental industry.
Normal cleaning, adjustments or maintenance jobs
cannot be claimed as part of the guarantee.
All guarantee work must be carried out by a
service centre authorized by the manufacturer.

10. Wearing parts

Various parts are subject to application-specific
wear or to normal wear and must be replaced in
good time if necessary. The following parts are
subject to normal wear and are not covered by the
manufacturers guarantee:
 All rubber parts that come into contact with the
spraying agent
 Spray nozzle
 Filters
 Seals
 Rechargeable battery
 Fuse
Warranty ; Wearing parts
ENGLISH 17