Warranty / Procedure In Case Of Repair; Product Specifications - Ivoclar Vivadent Bluephase PowerCure Mode D'emploi

7. Warranty / Procedure
in Case of Repair
The warranty period for Bluephase PowerCure is 3 years
from the date of purchase (battery: 1 year). Malfunctions
resulting from faulty material or manufacturing errors
are repaired free of charge during the warranty period.
The warranty however does not confer rights to
compensation for any material or non-material damage.
The apparatus must only be used for the intended
purposes. Any other uses are contraindicated. The
manufacturer does not accept any liability resulting from
misuse and warranty claims cannot be accepted in such
cases. This is particularly valid for:
• Damage resulting from improper handling, especially
incorrectly stored batteries (see Product Specifi cations:
Transportation and storage conditions).
• Damage to components resulting from wear under
standard operating conditions (e.g. battery).
• Damage resulting from external influences, e.g. blows,
drops to the floor.
• Damage resulting from incorrect set-up or installation.
• Damage resulting from connecting the unit to a power
supply, the voltage and frequency of which do not
comply with the ones stated on the rating plate.
• Damage resulting from improper repairs or
modifications that have not been carried out by
certified Service Centres.
In case of a claim under warranty, the complete
apparatus (handpiece, charging base, battery, power
cord and power pack) must be returned, carriage paid, to
the dealer or directly to Ivoclar Vivadent, together with
the purchase document. Use the original packaging with
the corresponding cardboard inserts for transportation.
Repair work may only be carried out by a certified
Ivoclar Vivadent Service Centre. In case of a defect that
cannot be rectified, please contact your dealer or your
local Service Centre (see addresses on the reverse side).
A clear description of the defect or the conditions under
which the defect occurred will facilitate locating the
problem. Please enclose this description when returning
the apparatus.
The product has been developed solely for use in dentistry. Processing should be carried out strictly
according to the Instructions for Use. Liability cannot be accepted for damages resulting from failure
to observe the Instructions or the stipulated area of application. The user is responsible for testing the
products for their suitability and use for any purpose not explicitly stated in the Instructions.

8. Product Specifications

Ivoclar Vivadent Polywave
Light source
Wavelength range 385–515 nm
Light intensity 3sCure program: 3,050 mW/cm
Turbo program: 2,100 mW/cm
High Power program: 1,200 mW/cm
PreCure program: 950 mW/cm
Operation 3 min on / 7 min off (intermittent)
Light guide 10>9 mm, autoclavable
Signal transmitter Beeps every 10 seconds and every time the
Start/Stop button or the Time/Program
selection button is activated or the anti-glare
protection is enabled or the curing process is
aborted and 30-second waiting time after the
3sCure program has been used twice in
succession
Dimensions of the L = 170 mm, B = 30 mm, H = 30 mm
handpiece
Weight of the handpiece 135 g (including battery and light guide)
Operating voltage of the 3.7 VDC with battery
handpiece 5 VDC with power pack
Operating voltage of the 5 VDC
charging base
Power supply Input: 100–240 VAC, 50–60 Hz max 1 A
Output: 5 VDC / 3 A
Manufacturer: EDAC POWER ELEC.
Type: EM1024B2
Operating conditions Temperature +10 °C to +35 °C
Relative humidity 30 % to 75 %
Ambient pressure 700 hPa to 1060 hPa
Dimensions of the D = 110 mm, H = 55 mm
charging base
Weight of the charging 145 g
base
Charging time Approx. 2 hours (with the battery empty)
Power supply of the Li-Ionen battery
handpiece
Transportation and Temperature –20 °C to +60 °C
storage conditions Relative humidity 10 % to 75 %
Ambient pressure 500 hPa to 1060 hPa
The curing light has to be stored in closed,
roofed rooms and must not be exposed to
severe jarring.
Battery:
– Do not store at temperatures above
40 °C / 104 °F (or 60 °C / 140 °F for a short
period). Recommended storage temperature
15–30 °C / 59–86 °F
– Keep the battery charged and store no longer
than 6 months.
Delivery form 1 Charging base with power cord and power
pack
1 Handpiece
1 Handpiece support
1 Light guide 10>9 mm
1 Anti-glare shield
3 Anti-glare cones
1 Pack of sleeves (1x 50 pcs)
1 Instructions for Use
LED
®
2 ± 10 %
2 ± 10 %
± 10 %
2
2 ± 10 %
19