Warranty / Procedure In Case Of Repair; Product Specifications; Delivery Form; Accessories - Ivoclar Vivadent bluephase Mode D'emploi

Warranty /
Procedure in case of repair
The warranty period for bluephase is 3 years from the
date of purchase (battery 1 year). The warranty includes
an LED operating life of 300 hours. Malfunctions result-
ing from faulty material or manufacturing errors are
repaired free of charge during the warranty period. The
warranty does not provide the right to recover any mate-
rial or non-material damage other than the ones men-
tioned. The apparatus must only be used for the intended
purposes. Any other uses are contraindicated. The manu-
facturer does not accept any liability resulting from mis-
use and warranty claims cannot be accepted in such
cases. This is particularly valid for:
– damage resulting from improper handling, especially
incorrectly stored batteries (see Technical data: Trans-
portation and storage conditions).
– damage to components resulting from wear under
standard operating conditions (e.g. battery).
– damage resulting from external influences, e.g. blows,
drop to the floor.
– damage resulting from incorrect set-up or installation.
– damage resulting from connecting the unit to a power
supply, the voltage and frequency of which do not
comply with the ones stated on the rating plate.
– damage resulting from improper repairs or modifica-
tions that have not been carried out by certified
Service Centers.
In case of a claim under warranty, the complete appara-
tus (handpiece, charging base, power cord, and power
pack) must be returned, carriage paid, to the dealer or
directly to Ivoclar Vivadent, together with the purchase
document. Use the original packaging with the corre-
sponding cardboard inserts for transportation.
Repair work may only be carried out by a certified
Ivoclar Vivadent Service Center. In case of a defect that
cannot be rectified, please contact your dealer or your
local Service Center (see addresses on the reverse side).
A clear description of the defect or the conditions under
which the defect occurred will facilitate locating the
problem. Please enclose this description when returning
the apparatus.
Product specifications

Delivery form

1 Charging base, 1 Power cord, 1 Power pack,
1 Handpiece, 1 Battery (Li-Po), 1 10 mm light probe,
3 Anti-glare cones, 1 Set of Operating Instructions

Accessories

The following accessories are available for bluephase:
REF Description
608537 Light probe 10 mm, black (G2)
608538 Pin-point light probe 6>2 mm, black
551756 Anti-glare cones
592496 Anti-glare shield
608534 bluephase charging base (G2)
608535 bluephase battery (G2)
608532 bluephase handpiece (G2)
607922 bluephase meter
608554 bluephase sleeves (G2)

Technical data

Operating voltage charging base
Operating voltage handpiece
Power pack
Output
TYPE 15.2630

Operating conditions

Temperature
Relative humidity
Ambient pressure
Dimensions of the charging base
Weight of the charging base
Charging time
Power supply of the handpiece
Max. battery time
Light source
Wavelength range
Light intensity
Operating
Dimensions of the handpiece:
Weight of the handpiece
(incl. battery)

Transportation and storage conditions:

Temperature
Relative humidity
Ambient pressure
bluephase has to be stored in closed, roofed rooms.
Protect the device from severe jarring.
Battery
– Do not store at temperatures above 40 °C / 104 °F
(or 60 °C / 140 °F for a short period).
Recommended storage temperature 20 – 25 °C (68 – 77 °F).
– Always store the battery charged and not for longer than 6 months.
5 VDC
3.7 VDC with battery
5 VDC with power pack
100–240 VAC / 50-60 Hz /
max. 0.4 A
5 VDC
+10 °C to +40 °C
(+50 to +104 °F)
30% to 75%
700 hPa to 1060 hPa
L=205mm W=150mm H=85mm
250 g
approx. 2 h (with the battery empty)
Li-Po battery
approx. 60 min.
(with a new, fully charged battery)
5W LED
380 – 515 nm
max. 1,200 mW/cm2 ± 10 %
6 min. on / 4 min. off (intermittently)
L=260mm W=42mm H=120 mm
245 g
-20 °C to +60 °C (-4 to 140 °F)
10% to 75%
500 hPa to 1060 hPa
15