Technical Data - EKOM DK50 PLUS Manuel De L'utilisateur

6. TECHNICAL DATA

Compressors are designed for dry and ventilated indoor environments with the following
conditions:
Temperature :
Max. relative humidity.:
Max. absolute humidity.
Tab.1
5 – 7 bar
Nominal voltage /
frequency (*)
Capacity at 5 bar
Working pressure (**)
Capacity with KJF-1
at 5 bar
Max. current
Motor power
Air tank volume
Air quality – filtration
Maximum operating
pressure of safety valve
Noise level at 5 bar
Operating mode
PDP - drying performance
at 7 bar
Time to fill air tank from 0
to 6 bar
Dimensions (net)
w x d x h
Net weight(****)
Classification under EN
60601-1
Notes:
(*) When ordering, state the version of the compressor
(**) For other range of pressure:consult with the supplier
(***) Weight of compressors with a KJF1 unit _add 3 kg
(****)Information about the weight is for informative purposes only and applies to the product without any
additional accessories.
NP-DK50 PLUS-1_01-2018-MD A
+5°C až +40°C,
70%,
3
15 g/m
DK50 PLUS
230 / 115 /
V / Hz
50/60 60
Lit.min-1 75/85 85
bar 5.0 – 7.0
Lit.min-1 75/85 85
A 3.8/4.8 8.9
kW 0.55
Lit.
25
m
-
bar 8.0
LpfA
 66/68  68
[dB]
100%
-
s 123/105 105
mm 460x500x708
kg 48 (***)
- 6 -
DK50 PLUS S DK50 PLUS/M DK50 PLUS S/M
230 / 115 / 230 /
50/60 60 50/60
75/85 85 58/68
5.0 – 7.0 5.0 – 7.0
75/85 85
3.9/4.9 9 3.9/4.9
0.55 0.55
25
-
8.0
 47/50  50  66/68
100% 100%
 +3°C
-
123/105 105 157/128
560x675x877 460x565x708
87 (***)
Class I.
DK50 PLUS
115 / 230 / 115 /
60 50/60 60
68 58/68 68
5.0 – 7.0
- -
9 4/5 9.1
0.55
25 25
0.3 0.3
8.0 8.0
 68  47/50  50
100%
 +3°C
128 157/128 128
560x675x877
53 92
02/2018