Personnel Qualifications; Danger In The Event Of Non-Observance Of The Safety Instructions; Safety Instructions For The Operator; Safety Instructions For Inspection And Installation Work - salmson LRE Notice De Montage Et De Mise En Service

English
2.2

Personnel qualifications

2.3 Danger in the event of non-
observance of the safety
instructions
2.4

Safety instructions for the operator

2.5 Safety instructions for inspection
and installation work
2.6 Unauthorised modification and
manufacture of spare parts
2.7

Improper use

51
The installation, operating and maintenance personnel must have the
appropriate qualifications for this work.
Non-observance of the safety instructions can result in risk of injury
to persons and damage to product/unit. Non-observance of the safety
instructions can result in the loss of any claims to damages.
In detail, non-observance can, for example, result in the following
risks:
• Failure of important product/unit functions
• Failure of required maintenance and repair procedures
• Danger to persons from electrical, mechanical and bacteriological
influences
• Property damage
The existing directives for accident prevention must be adhered to.
Danger from electrical current must be eliminated. Local directives or
general directives [e.g. IEC, VDE etc.] and local power supply compa-
nies must be adhered to.
This device is not intended to be operated by persons (including
children) with impaired physical, sensory or mental capacities or lack
of experience and/or lack of knowledge, except in cases where they
are supervised by a person responsible for their safety or where they
receive instruction from such a person as to how the device is to be
operated.
Children must be kept under supervision in order to ensure that they
do not play with the device.
The operator must ensure that all inspection and installation work is
carried out by authorised and qualified personnel, who are sufficiently
informed from their own detailed study of the operating instructions.
Work on the product/unit should only be carried out when it has been
brought to a standstill. It is mandatory that the procedure described
in the installation and operating instructions for shutting down the
product/unit be complied with.
Modifications to the product are only permissible after consultation
with the manufacturer. Original spare parts and accessories author-
ised by the manufacturer ensure safety. The use of other parts can
nullify the liability from the results of their usage.
The operating safety of the supplied product is only guaranteed when
used properly in accordance with the section in the operating instruc-
tions titled "Intended use". The limit values must on no account fall
under or exceed those specified in the catalogue/data sheet.
Pompes Salmson 04/2011