Maintenance And Repairs; Maintenance; Repairs; Troubleshooting - Burkert PTB 07 ATEX 2063 X Mode D'emploi

07 ATEX 2063 X

Maintenance and Repairs

9. MAINTENANCE AND REPAIRS

9.1. Maintenance

The coil AC19 is maintenance-free provided the application conditions
described in the instructions are observed

9.2. Repairs

DANGER!
Danger - improper repairs!
Following repairs, the safety and function of the coil AC19 and the
corresponding solenoid valve cannot be guaranteed unless the
repairs were carried out by the manufacturer.
• Have the device repaired by the manufacturer only!

9.3. Troubleshooting

In the event of malfunctions, make sure that
→
the device has been installed according to the instructions,
→
the connection has been made properly,
→
the device is not damaged,
→
the voltage and pressure have been switched on,
→
the pipelines are free.

10. TRANSPORT, STORAGE, DISPOSAL

NOTE!
Transport damages!
Inadequately protected equipment may be damaged during
transport.
• During transportation protect the device against wet and dirt in
shock-resistant packaging.
• Avoid exceeding or dropping below the allowable storage
temperature.
Incorrect storage may damage the device.
• Store the device in a dry and dust-free location!
• Storage temperature: -40 ... +55 °C.
Damage to the environment caused by device components
contaminated with media.
• Ensure the device and packaging are disposed of in an environ-
mentally sound manner.
• Observe applicable regulations relating to refuse disposal and
the environment.
english
15