º Using The Timer Function; º Display Brightness - Brandt FP562BB Guide D'utilisation

99643801_A_ML.qxp 22/05/2007
EN 4 / USING YOUR APPLIANCE
USING THE TIMER FUNCTION
•
- Your oven's programmer can be used as an
independent timer that allows you to count
down a time without operating the oven.
In this case, the timer display has priority over
the clock display.
- Press the " "
the timer symbol begins flashing
-> 0.00 and a small hourglass both flash.
- Adjust the chosen time by pressing the
touch controls + or - (fig.2).
- Press the touch control "
wait for a few seconds.
The display stops flashing after a few seconds and the timer starts working, counting down the
time in seconds.
Once the time has expired, the timer emits a series of beeps to notify you.
The beeps can be stopped by pressing any touch control.
Warning
It is possible to change or cancel the timer at any time.
DISPLAY BRIGHTNESS
•
You can adjust the brightness of your display. To
do this:
- Set and validate the time on your programmer
to 0:10 (fig.1).
- Press simultaneously on the + and - touch con-
trols for about ten seconds until "CO" is dis-
played, in order to enter the adjustment mode
(fig.2) .
- Press the touch controls + and - in order to ob-
tain the desired brightness.
After having adjusted the brightness to your lik-
ing, wait a few seconds and return your pro-
grammer to the current time of day.
16:31 Page 64
(fig.1) until
TOUCH CONTROL
" to validate, or
64
fig.1
fig.2
fig.1
fig.2