Using Your Appliance; Before Using Your Appliance For The First Time; Temperature Control; Cooking Time Setting - Brandt 21L Manuel D'instruction

3) USING YOUR APPLIANCE

a) Before using your appliance for the first time
1. Unpack your appliance and check that all elements and accessories are present
and undamaged.
2. Check that all wrap elements (plastic, cardboard box, polystyrene) have been
removed.
3. Clean all the parts according to the instructions given in the "Maintenance of your
appliance" section.
4. Dry all parts thoroughly and assemble them, the oven is now ready to use.
Heat the empty oven:
• Insert the tray and wire track.
• Set the cooking function on
then heat the empty oven for about 10 minutes.
• Then, let it cool down, remove the plug from the power socket and clean all the
detached parts again.
Note:
There may be some smoke and a burning smell during the first use, however it is normal.
b) Temperature control
c) Cooking time setting
Note: If the inside of the oven is dirty, cooking may take slightly longer than usual.
and set the temperature control knob to « 250°C »
Set the "Temperature Control" by turning the knob clockwise to the
suitable temperature for the dish you are cooking.
(Temperature Control between 70°C and 250°C)
Set the timer to the cooking time (in minutes) depending on the dish
you are cooking by turning it clockwise.
The indicator light allows you to ensure the orderly functioning of
the heating elements. The oven will turn off automatically at the end
of the selected time and a bell will ring.
The oven can be turned off manually during cooking by turning the
timer anti-clockwise to the "0" position.
23