Use Of Your Appliance; Before Using Your Appliance For The First Time; Temperature Control; Cooking Time Setting - Brandt FC265MHW Manuel D'instruction

3) USE OF YOUR APPLIANCE

a) Before using your appliance for the first time
Unpack your appliance and check that all elements and accessories are present and

undamaged.
Check that all wrap elements (plastic, cardboard box, polystyrene) have been

removed.
Clean all the parts according to the instructions given in the "Maintenance of your

appliance" section.
Dry all parts thoroughly and assemble them, the oven is now ready to use.

Heat the empty oven:
Insert the tray and wire track.

Set the cooking function on

« 250°C » then heat the empty oven for about 10 minutes.
Then, let it cool down, remove the plug from the power socket and clean all the

detached parts again.
Note:
There may be some smoke and a burning smell during the first use, however it is normal.
b) Temperature control
Adjust the temperature depending on the dish you will cook.
Press on «+/-» to adjust the temperature 10 by 10°C according to the dish
you want to cook (temperature between 70°C and 250°C). After having
adjusted the thermostat, the cooking starts after 5 seconds of inactivity. Then,
the screen will show the temperature of cooking.
c) Cooking time setting
Press on «+/-» to adjust the time from 0 to 120 min. Time can be
increased/decreased 1 by 1 until 20 min; 5 by 5 increase/decrease above 20
min to 90 min. After having adjusted the cooking time, the oven starts the
cooking after 5 seconds of inactivity. Then, the screen will show the
remaining time of cooking.
The oven can be turned off manually during cooking by turning the timer
anti-clockwise to the "0" position.
Note: If the inside of the oven is dirty, cooking may take slightly longer than usual.
and set the temperature control knob to
23